Operating Voltage: 220-240V~
Frequency: 50Hz
Maximum Load: 350W
Minimum Load: 10W
Dimming Mode: Trailing Edge
Control Method: One way
Dimmable LED lamps: 10-150W
LV Halogen lighting with electronic transformers: 10-350VA
Incandescent lighting, MV Halogen lamps: 10-350VA
Functions:
a) Short press the button to on/off and long press to dim up/down the light.
b) Minimum Brightness: If an LED becomes unstable at low dimming levels, it can flicker or pulse on/off. The dimmer’s minimum brightness can be set to a level above the point at which a lamp flickers or pulses.
1)Remove the top tap.
2)Hold down programming button until LED slow flashing.
3)Hold down the button to the setting level.
4)Double press the button to exit programming mode.
c) Maximum Brightness: The maximum brightness level provided by the dimmer can be set to suit customer requirements.
1)Remove the top tap.
2)Hold down the programming button when LED start slow flashing then press the button again the LED will start quick flashing.
3)Hold down the button to the setting level.
4)Double press the button to exit programming mode.
d) LED Indicator: The blue led indicator will be on when the dimmer is on.
e) Memory Dimmer: The dimmer has the option to turn on at the brightness level set when the lights were turned off/on at the last setting brightness.
f) Protection: Overload, short-circuit, over current, over temperature protection.