Manufacturer of Innovative Electrical Supplies

Power Point Double Outlet GPO Slim Wafer Extra Thin Flush 10A with Dual USB Socket 2.1A 5V

Code P2W/USB Category Tag
CategoryWafer Series
NameSlim line power point double with dual USB chargers
Power currenta.c.
Power phaseSingle
StructureMoulded top cover and under body
Material of cover/bodyImpact-resistant polycarbonate
ColorElectrical white
Number of switch poleSingle
Number of socket gang2
Number of socket outlet2
USB Charger output voltage5V
USB Charger output current2.1A
Pin3 pins (active, neutral, earth)
Earth pinFlat
Cable connectorCopper ferrule x3
Cable accomodated2.5mm x3
On wall mountingHorizontal
Fixing centres84mm
Flush mount fittingfits all general brackets in the market
Surface mount fittingfits Transco Wafer Series mounting flanges only
Made in accordance withAS/NZS3100, AS/NZS3112 and AS/NZS3133
Good Design Award Transco Electrical
Australian Design Award

Slim Wafer Design Advantage

  • Good Design Award winner 2018 – Product Design on Hardware and Building
  • Transco Slim Wafer slimline outlets and switches are the ONLY retro fittable thin profile in the market. It also has the thinnest profile among the similar products.
  • Transco Wafer patented flush plate mounting system allows for seamless exchange of old chunky powerpoints and switches to the new wafer thin Transco. There is no need for tricky paper templates or expensive special mounting plates
  • Transco Wafer sleek curved edge gives the lowest 2mm edge profile possible. Other rival slim series have edge profiles from 4mm to 9mm.
  • Transco Wafer range is slimmer than slim. The wafer thin has architects and designers talking from coast to coast.
Transco Slim Wafer Slimline outlets and switch​es​

Slim Wafer Installation Advantage

  • The wafer range fits off to standard plaster clip or bracket no need for expense recessed mounting accessories.
  • In a world first the Transco Wafer Series is the only retro fittable thin profile series.
  • The wafer’s malleable plates means a smooth fit every time.

Why Wafer?

When designing the Wafer series we had two goals, to produce a switch and outlet series that is as flush to the wall as possible and all electricians could fit to any wall, with ease. The Transco Wafer series has achieved both the design criterion, with a 2mm edge profile and the patented flush plate mounting system. If your project needs the best insist on Transco Wafer.

The Wafer Series of switches and power outlets are manufactured in accordance with AS/NZS3100 and AS/NZS3133 meeting all relevant Australian Standards, and complies with the latest wiring rules and exceeds all electrical supply authority standards.